Eterra Hurricane BMX-600 Concrete Mixer for Skid Steer

Eterra Hurricane BMX-600 Concrete Mixer for Skid Steer

The Eterra Hurricane BMX-600 is the largest mixer in the Hurricane line, formerly sold as the Mix & Go 600. It delivers the biggest batch per cycle of any Hurricane model while still running on 11–22 GPM, so contractors pouring volume get fewer cycles per job without needing a high-flow machine. Hydraulic hoses and couplers included. Available from Skid Steer Store.

Built for Volume Work

• Largest batch in the line — fewer cycles to complete a pour than the 250 or 450.
• Standard-flow hydraulics — 11–22 GPM, the same as the smaller models. No high-flow machine needed.
• Load, mix and place with one machine — the loader does all three jobs.
• Independent of ready-mix scheduling — no truck minimums, delivery windows or short-load fees.
• Hoses and couplers included — ready to plumb into your loader.

Hurricane Concrete Mixer Line

All models run on 11–22 GPM. Your machine can exceed 22 GPM, but the mixer will not run at full RPM above that range.

Check Your Operating Capacity

The BMX-600 carries the most material of any Hurricane model, so a loaded mixer is the heaviest of the line. Confirm your machine's rated operating capacity covers the attachment plus a full batch before ordering. Contact Skid Steer Store if you want that checked against your model.

Electrical Connector Required

The BMX-600 needs an electrical connector matching your loader's auxiliary port — standard, Bobcat 7-pin, 8-pin or 14-pin. See our Eterra Electrical Connectors listing.

Common Applications

Large slab and foundation pours, commercial footings, retaining wall bases, agricultural and equestrian construction, solar and utility post setting at volume, and remote or rural sites beyond practical ready-mix delivery.

Frequently Asked Questions

Is this the same as the Mix & Go 600?
Yes. The Hurricane BMX-600 is the same mixer previously sold as the Mix & Go 600.

Do I need a high-flow machine for the BMX-600?
No. It runs on the same 11–22 GPM standard-flow hydraulics as the rest of the line. The larger capacity affects weight, not flow requirements.

BMX-600 or BMX-450?
Choose the 600 if batch count is your bottleneck on large pours. Choose the 450 if your machine's lift capacity is the tighter constraint.

Do I need an electrical connector?
Yes, matched to your machine's auxiliary electrical port.

Order From Skid Steer Store

Add the BMX-600 to your cart above, along with the matching electrical connector. Want your loader's capacity checked against a full batch first? Contact Skid Steer Store with your make and model.