Eterra Hurricane BMX-450 Concrete Mixer for Skid Steer

Eterra Hurricane BMX-450 Concrete Mixer for Skid Steer

The Eterra Hurricane BMX-450 is the mid-capacity mixer in the Hurricane line, formerly sold as the Mix & Go 450. It steps up batch volume over the BMX-250 while running the same 11–22 GPM hydraulics, which makes it the practical choice once you are pouring slabs and multi-footing jobs rather than single posts. Hydraulic hoses and couplers included. Available from Skid Steer Store.

Why Mix On the Machine

• Load, mix and pour with one machine — no wheelbarrows, towed mixer or staging area.
• Mix in transit — the batch is ready when you arrive at the pour.
• Fewer trips per pour — larger batches mean less back-and-forth than the BMX-250.
• No truck minimums — batch what the job needs, when it needs it.
• Hoses and couplers included — ready to plumb into your loader.

Hurricane Concrete Mixer Line

All models run on 11–22 GPM. Your machine can exceed 22 GPM, but the mixer will not run at full RPM above that range.

Electrical Connector Required

The BMX-450 needs an electrical connector matching your loader's auxiliary port — standard, Bobcat 7-pin, 8-pin or 14-pin. See our Eterra Electrical Connectors listing. Without it the mixer mounts and the hydraulics run, but the electric control will not operate.

Common Applications

Slab and pad pours, foundation and footing work, retaining wall bases, equestrian and agricultural projects, hardscape mortar, and any site where ready-mix delivery is impractical or uneconomical.

Frequently Asked Questions

Is this the same as the Mix & Go 450?
Yes. The Hurricane BMX-450 is the same mixer previously sold as the Mix & Go 450.

BMX-450 or BMX-250?
Choose the 450 if you regularly pour slabs or multiple footings in a session. The 250 is sufficient for post setting and occasional small pours. Both use identical hydraulics, so the decision is purely about batch size.

What hydraulic flow do I need?
11 to 22 GPM. Machines can exceed 22 GPM but the mixer will not reach full RPM.

Do I need an electrical connector?
Yes, matched to your machine's auxiliary electrical port.

Order From Skid Steer Store

Add the BMX-450 to your cart above, along with the matching electrical connector. Not sure whether the 450 or 600 suits your pours? Contact Skid Steer Store and we will size it to your typical job.