Eterra 9 Ft. Razor Sickle Bar Mower for Excavator

Eterra 9 Ft. Razor Sickle Bar Mower for Excavator

The Eterra 9 ft. Razor sickle bar mower is the widest excavator bar Eterra builds. On long uninterrupted work — canal banks, levees, highway shoulders, mile-long drainage runs — nine feet of cut per pass is what separates a contract that pencils from one that does not. It asks for a carrier with the stability to hold that leverage at reach. Rated for 8–20 GPM in two flow configurations. Available from Skid Steer Store.

Built for Coverage

• Widest excavator bar in the range — 9 ft. per pass, roughly 80% more than the 5 ft.
• Reach over, not drive through — work banks and water's edge from stable ground.
• Almost no thrown material — critical on live highway shoulders.
• Low hydraulic draw for the width — 9 ft. of cut without a high-flow machine.
• Cuts wet and aquatic growth — canal and shoreline vegetation that clogs a flail.

Choosing Your Bar Length

Bar length multiplies leverage at full boom extension. Confirm your excavator's stability and lift at reach before committing to the longest bar.

Flow Configurations

Specifications

Your Mount Is Sold Separately

Excavator sickle bar models require a mount, not included in the price above. Add the correct one from our Eterra Attachment Mounts listing — Machine Specific for your excavator (make and model needed), or Universal Mount to run it on a skid steer. Raptor boom mounting options are also available.

Common Applications

Interstate and highway shoulder mowing, irrigation canal and levee maintenance, large drainage networks, airport and solar farm perimeters, flood control channels, and high-mileage municipal contract mowing.

Frequently Asked Questions

Can my excavator handle a 9 ft. bar?
Flow-wise, any machine in the 8–20 GPM range. Stability is the real constraint — a 9 ft. bar at full extension puts significant leverage on the carrier. Contact Skid Steer Store with your make, model and operating weight.

Which flow configuration should I order?
Match the bracket containing your excavator's rated auxiliary flow — 12–15 GPM or 15–20 GPM.

When is 9 ft. the right choice?
When you bill by the mile or the acre on open ground. On tight sites the extra width becomes a liability.

Is the mount included?
No. Excavator models require a mount sold separately.

What will it cut?
Grass, weeds, reeds and brush under 2" in diameter.

Order From Skid Steer Store

Select your flow configuration above, then add your mount as a separate item. Want your carrier checked for stability at full reach with the longest bar? Contact Skid Steer Store with your make, model and operating weight.